UT150溫度調節器
 
Analog Output Specifications
•Number ofoutputs:
Control output:1
Cooling-side control output of Heating/cooling type:1
•Output type:Current output or voltage pulse output
•Current output:4to20mA DC or0to20mA DC/load resistance of 600?or less
•Current output accuracy:±0.1% of span(±5%of span for 1mA or less)
The accuracy is that in the standard operating conditions:23±2°C, 55±10%RH,and power frequency at50/60Hz.
•Voltage pulse output:
Use:Time proportional output
On-voltage: 12V or more/load resistance of 600? or more
Off-voltage:0.1V DC or less
Time resolution:10ms or 0.1%of output,whichever is larger
Step Response Time Specifications
Within 500ms(when the control period is 50ms or 100ms)
Within 1s(when the control period is 200ms)
(63% of analog output response time when a step change of 10 to 90% of input span is applied)
Relay Contact Output Specifications
•Contact type and number of outputs:
Control output: contact point 1c;1 point
Cooling-side control output of Heating/cooling type:contact point 1c;1 point(for UT55A only)
For UT52A,contact point 1a; 2points for both heating and cooling sides Alarm output:contact point 1a;3 points(common is independent)
 
UT150溫度調節器|日本橫河溫控器|日本橫河yokogawa溫控器選型表
 
                        | 型號 | 后綴碼 | 說明 | 
                    | UT150 |   |   |   | 溫度調節器(標準型)  | 
                    | 控制輸出 | -R  |   |   | 繼電器接點輸出 | 
                    | -V  |   |   | 電壓脈沖輸出 | 
                    | -A |   |   | 4~20mA 輸出 | 
                    | 固定碼 | N  |   | 固定為N  | 
                    | 可選項 | /AL  | 報警輸出(2點)  | 
                    | /HBA  | 加熱器斷線報警另加2點報警輸出 | 
                    | /EX | 由外部接點切換到SP1或SP2,由外部接點啟動計時器 | 
                    | /RET | 4~20mA傳送輸出(PV值) | 
                    | /RS  | 通信(RS485,協議為MODBUS,PC-link,Ladd  | 
                    | /V24  | 供電電源:24VDC/24VAC | 
    
 
UT150溫控器|日本橫河溫控器|日本橫河yokogawa溫控器選型表
 
                        | 型號 | 后綴碼 | 說明 | 
                    | UT150 |   |   |   | 溫度調節器(加熱/冷卻型) | 
                    | 加熱端 | -R  |   |   | 繼電器接點輸出 | 
                    | 控制輸出 | -V  |   |   | 電壓脈沖輸出 | 
                    | -A |   |   | 4~20mA 輸出 | 
                    | 冷卻端 | R |   | 繼電器接點輸出 | 
                    | 控制輸出 | V |   | 電壓脈沖輸出 | 
                    | A |   | 4~20mA 輸出 | 
                    | 可選項 | /AL  | 報警輸出(2點)  | 
                    | /HBA  | 加熱器斷線報警另加2點報警輸出 | 
                    | /EX | 由外部接點切換到SP1或SP2,由外部接點啟動計時器 | 
                    | /RS  | 通信(RS485,協議為MODBUS,PC-link,Ladd  | 
                    | /V24  | 供電電源:24VDC/24VAC | 
    
選型舉例:
UT150-RN/AL、UT150-RN/HBA、UT150-RN/RS、UT150-RN/V24
UT150-VN/AL、UT150-VN/HBA、UT150-VN/RS、UT150-VN/V24
UT150-AN/AL、UT150-AN/HBA、UT150-AN/RS、UT150-AN/V24
UT150-RR/AL、UT150-RR/HBA、UT150-RR/RS、UT150-RR/V24
UT150-RV/AL、UT150-RV/HBA、UT150-RV/RS、UT150-RV/V24
UT150-RA/AL、UT150-RA/HBA、UT150-RA/RS、UT150-RA/V24
UT150-VR/AL、UT150-VR/HBA、UT150-VR/RS、UT150-VR/V24
UT150-VV/AL、UT150-VV/HBA、UT150-VV/RS、UT150-VV/V24
UT150-VA/AL、UT150-VA/HBA、UT150-VA/RS、UT150-VA/V24
UT150-AR/AL、UT150-AR/HBA、UT150-AR/RS、UT150-AR/V24
UT150-AV/AL、UT150-AV/HBA、UT150-AV/RS、UT150-AV/V24
UT150-AA/AL、UT150-AA/HBA、UT150-AA/RS、UT150-AA/V24